Outdoor Rasa Beige Quartzite-Effect Porcelain Matt 90x60cm

In stock
Outdoor Rasa Beige Quartzite-Effect Porcelain Matt 90x60cm
€19.97 /unit
€36.99 /m2
FREE Cut Sample
best price promise
free samples no delivery charge
free delivery on orders over €300
Need help? Call Us on (01) 486 6330

Our brand new Rasa range is a super realistic quartzite effect outdoor porcelain. These large format tiles are a superb addition to our extensive and carefully curated range of 20mm porcelain range.

If you want to attain a luxurious natural stone look with some turbo charged porcelain strength, incredible non-slip properties and zero maintenance, then our large format Rasa range is for you. 20mm porcelain is perfect for the Irish climate, they look just as good year round, while being super safe when wet.

The range comprises of three stunning earthy shades each with their own handsome personalities. Nero, Grey and Beige are all large format 600x900mm size, that when installed, give a space a grandiose feel due to the lack of grout lines.

Bring your garden patio or driveway to the next level with the remarkable functionality of these beautifully designed Rasa 20mm porcelain tiles.

Order free sample online now to see and feel the quality before you buy.

Material Porcelain
Colour Beige
Size 900x600x20mm
Finish Matt
Edge Style Flat
Suitability Floor
Brand Qua
Range Rasa Porcelain Range
M² Per box 1.08
Weight per m² (kg) 47.76
Write Your Own Review
You're reviewing:Outdoor Rasa Beige Quartzite-Effect Porcelain Matt 90x60cm
Your Rating

How to Install Outdoor Porcelain Paving

Three of the most common methods for installing outdoor porcelain tiles are outlined below.

Method 1 - Tile Adhesive onto a Solid Base

This method can be used for patios and driveways. It requires the concrete base to be fully cured and expansion joints will need to be added where necessary. With a solid base, achieving a level surface is simple but remember that falls will need to be added to help rain water drain away. Use a polymer modified cement-based adhesive that is suitable for outdoor use. On a solid base, rectified porcelain paving can be installed with a narrow join for a semi-seamless finish.

Method 2 - Wet Bed onto Prepared Sub-base

Paving installers and landscapers favour this method. However, because the tiles are non-porous, they will not adhere to a traditional wet bed. To make the tile stick, yu will need to either mix an admix into your sand and cement or apply a primer to the underside of the tiles. Be careful if using a primer – remove it from the surface and sides of the tile immediately! Check falls during installation and make adjustments by tapping the tiles with a rubber mallet. Avoid any voids beneath the tiles as this may result in the collection of residual moisture which will have no escape route.

Method 3 - Self-levelling Pedestals on roof terraces and balconies

Adjustable pedestals are perfect for use on balconies and terraces. Each pedestal has a self-levelling head and can be slightly adjusted once the tiles are installed. This is a ‘dry’ installation method as no adhesives or grouts are required. Joints are left open which allows for easy drainage and simple removal of tiles.Lay the weed membrane directly under the grass. Take it right to the edge of the area and overlap it by at least 100mm.