Thin Stone Cladding Grey HP013-1040
Thin Stone Cladding Grey
Total SQM Coverage:
Thinstone Cladding Grey is a great addition to our thinstone cladding range. It is made up of beautilful grey brick slips. We introduced this colour specifically to complement ivory and grey tiles which are two of our most in-demand colours at the moment. This cladding will also work really well outdoors and can be used for a feature wall or to brighten up any outdoor space. It goes particularly well with our Kota Green and Black Limestone Paving. Premium Natural Stone pieces glued together with a special stone epoxy. Fast and easy to fit. No need for specialist stonemasons. Each panel fits seamlessly into the next. Virtually invisible joint with little or no wastage. Suitable for interior and exterior use. Sold by the box, there are 12 pieces in each box which equates to 0.48m2.
|SQM per Box||0.48|
|Tiles per Box||12|
Write Your Own Review
External Corners> We recommend that you finish external corners off with a tile trim, this can be achieved by cutting the two pieces of cladding. Internal Corners> Again cut the edge off the cladding and use this for internal corners Straight Walls> Installation is very simple, put 2 beads of the Power Grab adhesive lengthways on the back of the cladding and stick it to the wall. Initial grab will take 10 minutes during which time you may need to support the cladding with a piece of wood or similar. The Power Grab Adhesive will fully cure in 24 hours. Be warned though once the adhesive has completely cured it is impossible to remove the cladding from the wall. The specialist stone adhesive will work on almost any surface including wood, plaster board, backer board, metal, brick and concrete.