PRICE GUARANTEE

WE'LL MATCH & BEAT THE PRICE

FREE SUPPORT

OUR EXPERTS ARE READY TO HELP

FREE DELIVERY

ON ALL ORDERS OVER £300*

95% OF PRODUCTS IN STOCK

HUGE WAREHOUSE READY TO DISPATCH

Yellow Granite Patio Pack A HG682MCBHPAVPPA

Rating:
100% of 100
Yellow Granite Patio Pack A
€561.12 price/unit
€51.96 price/m2
Loading...
Yellow Granite Patio Pack. Subtly coloured this opulent Granite slab would instantly embellish any space. When installed the machine-cut edges has a striking linear pattern. The slab has a Flamed finish, which is non-slip and ideal for outdoor use. This works well with G682 Yellow Tumbled Cobble and Bushhammered Yellow Granite Kerb
More Information
Colour Yellow
Brand N/A
Paving Size 300x290x20p / 600x290x10p / 600x600x20p/10.8m2
Paving Sold By M2
Tiles per Box 50
SQM per Box 10.8
Paving Range N/A
Range Granite Paving
Finish Flamed
Material Granite
Suitability Patio
Height N/A
Depth N/A
Write Your Own Review
You're reviewing:Yellow Granite Patio Pack A HG682MCBHPAVPPA
Your Rating
How To Lay Paving Slabs Step one> The area to be paved must dugout to at least 200mm in depth. Following this the area should then be back filled with 150mm sand/gravel 6 parts to one part cement, which is then to be compacted to 100mm. Step two> After the complete preparation of the area to be paved is complete, the laying can start. The mortar bed must be prepared for each slab individually, dependant on the depth/thickness that/each slab. A semi-dry mortar mix using 4 parts sand to 1 part cement is the necessary mix for the mortar bed. This ratio must be adhered to for natural stone to ensure it to have adequate support for the slab. Step three> When installing slabs that will have mortar joints, ensure the receiving joints of the already laid slab are lightly lathered. As when the adjoining slab is placed it creates a strong joint, which can be further strengthened during the pointing process. Lathering the mortar will also help keep a consistent joint profile throughout the area. When the slab is in place, it can be secured by tapping it down with a rubber mallet. Constantly throughout this laying process you must check the levels to ensure uniformity. Step four> Pointing (filling in the gaps) stage. With a wet mortar mix with a ratio of 4>1 building sand>cement, make sure that all the gaps between the slabs are completely filled. This is an important step to create a strong paving area, where there is gap there can be weakness, removing gaps strengthens the area. While pointing be careful not to use an excess as removing can be difficult.