BOTAMENT D 11 is a primer to prepare absorbent substrates for the subsequent application of tile adhesives, filler compounds, renders or paints in interior and exterior areas. Not suitable for priming for tiling on tile.
Can be diluted 1 : 1
Rapidly drying
Improves adhesion
Can be rolled or painted on
Reduces absorbency
Binds dust
Solvent-free
## Application areas ##
Priming of:
- concrete, lightweight concrete, and porous concrete
- brickwork
- cement and calcium sulphate screeds
- cement, lime and gypsum renders
- fibre cement boards
- plasterboards
- gypsum plaster
## Substrate preparation ##
The substrate must be in the following condition:
- absorbent, clean and frost-free
- stable
- free from grease, paint, separating agents and loose particles
## Substrate type : Application of BOTAMENT D11 ##
- absorbent mineral substrates = 1 x 1:1 diluted with water
- gypsum substrates / calcium sulphate screeds = 2 x undiluted
- plasterboards = 1 x undiluted (only on joints worked on with gypsum filler)
## Storage ##
cold and frost-free at least 12 months in its original sealed container
## How to use Botament D11 ##
apply BOTAMENT® D 11 by brush, lambskin roller, wallpapering brush or with a spray gun
the surface must be scratch-resistant after drying
only apply as much material so as to avoid the formation of a glossy film
Application and substrate temperature
+ 5 °C to + 30 °C
## Consumption or Usage ##
~ 60 – 100 ml/ m² depending on substrate absorbency
