Rubi T-Spacers 2mm (500pcs/Bag)

The RUBI joint tees form, without a doubt, a truly indispensable range for obtaining perfect finishes in any ceramic tile installation job.

RUBI manufactures the Ts for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.

The Ts for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tile coverings and floors with a minimum joint. The solid structure of the Ts for 1, 1.5, 2 and 3 mm joints has been designed to provide greater resistance to bending and crushing. These properties make the Ts for joints of 1, 1.5, 2 and 3 mm highly recommended for covering large format ceramic tiles.

The internal geometry of the Ts for 5 mm joints has been designed to provide greater resistance to bending and crushing.

The internal geometry of the Ts for joints from 7 to 10 mm is hollow and has a design with internal reinforcements that allows them to withstand stress and prevent crushing. This hollow design facilitates the entry of the joint mortar and, if the type of installation allows, leaving the T inside the placement joint without this affecting its integrity in the future.

The professional installer is very aware of the importance of using high quality spacers, since the finish of his work can be seriously deteriorated due to imperfections and irregularities.

The RUBI T joints stand out for the regularity of their production, the homogeneity of measurements and the absence of burrs and any other small defects. These particularities allow professionals who trust in RUBI joint Ts to obtain excellent finishes with total precision.