Tenax Titanium Knife-Grade Vinyl Ester High Strength Adhesive Extra Clear 1L (2 Component Set)

Our Tenax Titanium Knife-Grade Vinyl Ester Adhesive in Extra Clear is a premium, high-strength bonding solution engineered for applications where near-total transparency is required. Designed to set reliably even at lower temperatures, it offers exceptional low-yellowing performance, making it ideal for indoor and outdoor stone and tile installation projects year-round.

Key Features & Benefits:

• Perfect for Exposed Joints: Unlike slow-curing structural epoxy glues (such as Domo 10), Tenax Titanium is specifically formulated for visible joints, seaming, mitre cuts, laminations, and chip repairs.
• Ultra-Clear Finish & Easy Tinting: Cures virtually clear in thin film layers, allowing natural stone patterns to show through seamlessly. It also takes universal colour pigments effortlessly if custom shading is required.
• Fast Curing & Working Time: Provides an efficient 7 to 15-minute open working time in tins, allowing you to complete precision mitres and seams quickly.
• High-Gloss Polishability: Cures hard and polishes down smoothly to match the high-gloss shine of polished marble, granite, quartz, quartzite, ceramic, and porcelain.

Application & Mixing Instructions (Important):

1. Remove Glue: Scoop the required amount of knife-grade adhesive from the tin onto a mixing board.
2. Add Colour (Optional): If adding tint or colour dye, mix it into the adhesive before adding the hardener.
3. Add Hardener (1%–3% Ratio): Add 1% to 3% hardener relative to the amount of glue removed from the tin. (Note: Always use the supplied paste hardener, not thickener.)
4. Mix Thoroughly: Blend completely before applying to your surface.

Important Note on Mixing: Do not exceed the recommended 3% hardener ratio. Adding too much hardener can cause the adhesive to discolour and prevent it from bonding properly.