PRICE GUARANTEE

WE'LL MATCH & BEAT THE PRICE

FREE SUPPORT

OUR EXPERTS ARE READY TO HELP

FREE DELIVERY

ON ALL ORDERS OVER £300*

95% OF PRODUCTS IN STOCK

HUGE WAREHOUSE READY TO DISPATCH

Mint Paving Calibrated Patio Pack B HMint22mmPPB

Rating:
93% of 100
Mint Paving Calibrated Patio Pack B
€482.21 price/unit
€32.47 price/m2
Loading...
Mint Sandstone Paving is our most popular paving, it has a base colour of beige and there are biscuit, pink and purple tones in it aswell. This material is quarried in our own family-owned quarries in India. We have a wide range of sizes available including 30x30, 60x30, 60x60, 60x90 and patio packs. We also stock natural stone cobbles, tumblies and kerbs in this material. When these different products are used on a garden project they combine beautifully to give a your garden the wow factor. In terms of maintenance all this stone needs is a power-wash once a year using our Sandstone cleaner.
More Information
Colour Beige
Brand N/A
Paving Size Paving Mint 22mm Calibrated Patio Pk B 300x290x9pc /600x290x13pc /600x600x13pc / 600x900x13pc/14.85m2
Paving Sold By M2
Tiles per Box 48
SQM per Box 29.43
Paving Range N/A
Range No
Finish Natural Surface, Handcut edges
Material Sandstone
Suitability Patio
Height N/A
Depth N/A
Write Your Own Review
You're reviewing:Mint Paving Calibrated Patio Pack B HMint22mmPPB
Your Rating
How To Lay Paving Slabs Step one> The area to be paved must dugout to at least 200mm in depth. Following this the area should then be back filled with 150mm sand/gravel 6 parts to one part cement, which is then to be compacted to 100mm. Step two> After the complete preparation of the area to be paved is complete, the laying can start. The mortar bed must be prepared for each slab individually, dependant on the depth/thickness that/each slab. A semi-dry mortar mix using 4 parts sand to 1 part cement is the necessary mix for the mortar bed. This ratio must be adhered to for natural stone to ensure it to have adequate support for the slab. Step three> When installing slabs that will have mortar joints, ensure the receiving joints of the already laid slab are lightly lathered. As when the adjoining slab is placed it creates a strong joint, which can be further strengthened during the pointing process. Lathering the mortar will also help keep a consistent joint profile throughout the area. When the slab is in place, it can be secured by tapping it down with a rubber mallet. Constantly throughout this laying process you must check the levels to ensure uniformity. Step four> Pointing (filling in the gaps) stage. With a wet mortar mix with a ratio of 4>1 building sand>cement, make sure that all the gaps between the slabs are completely filled. This is an important step to create a strong paving area, where there is gap there can be weakness, removing gaps strengthens the area. While pointing be careful not to use an excess as removing can be difficult.