8mm vs 12mm laminate flooring: light oak-effect laminate running through a bright living room and hallway
20 November 2026

Tile Grout Guide: Cement vs Epoxy, Grout Colours and Sealing

Getting grout right comes down to three decisions: which type to use, which colour to pick, and whether to seal it. The short answer is to use cement-based grout for most walls and floors, and epoxy grout where joints face constant water, food stains or heavy wear, such as showers, kitchen worktops, splashbacks and busy floors. On floors, choose a mid grey or a tone close to your tile, because bright white grout shows dirt quickly, and test the colour on a spare tile first. Seal cement grout in showers, kitchens and on floors once it has fully cured; epoxy grout doesn't need sealing.

Grout is the last thing to go on and the first thing people notice when it goes wrong. I've seen good floors let down by joints that turned grey within a year, and simple tiles look sharp for a decade because the grout was chosen and protected properly. Tile Merchant doesn't fit tiles, but we supply the grout and sealers, so this guide follows the order of the job: grout type, then colour, then sealing. It's the conversation worth having with your tiler before you order.


Key takeaways

  • Cement grout suits most walls and floors. Epoxy (RG) grout suits showers, worktops, splashbacks and busy floors where you want the lowest upkeep.
  • Check the EN 13888 code on the bag. CG2 WA is an improved cement grout with reduced water absorption and high abrasion resistance.
  • On floors, mid greys and tones close to your tile hide dirt far better than white. Always test the colour on a spare tile.
  • Seal cement grout in wet and busy areas with a penetrating sealer after the full cure time. Epoxy grout generally doesn't need sealing.

Which type of grout should I use: cement or epoxy?

Use cement-based grout for most walls and floors, and epoxy grout where the joints take daily water, stains or heavy wear. The grout type also decides whether you'll need to seal later, so it's the first choice to make.


Cement grout vs epoxy grout compared

Feature Cement grout (CG) Epoxy grout (RG)
Water and stain resistance Porous, absorbs water and stains if left unsealed Dense, very low absorption, resists most household stains
Flexibility Standard grout is rigid; flexible versions are made for floors that move Check the data sheet before using it over heated or timber floors
Ease of use Easier for DIY, forgiving to apply and clean off Harder: two-part mix, and residue must be cleaned off quickly
Working time Longer, so you can work at a steady pace Shorter, so you mix small amounts and work in sections
Sealing Recommended in wet and high-stain areas Generally not needed
Where it suits Most walls and floors, with a sealer where needed Showers, worktops, splashbacks and busy floors

Close-up of white tiles comparing a cement grout joint with an epoxy grout jointClose-up of white tiles comparing a cement grout joint with an epoxy grout joint
Cement grout has a matt, slightly textured finish. Epoxy sets smoother and denser.

Where cement grout works well

Cement grout is the default in most homes. It's easier to mix, gives you longer to work and clean the tile faces, and comes in the widest choice of colours. Bathroom walls, kitchen walls, living room floors and hallways all suit it, as long as you seal it where water and dirt are a daily problem. We stock grout from Bostik, Botament and Evo-Stik.


Where epoxy grout is worth the extra effort

Epoxy grout earns its place where joints take the most punishment:

  • Showers and wet rooms, where joints are wet every day and soap residue builds up.
  • Kitchen worktops, where oil, wine, coffee and food would stain a cement joint.
  • Splashbacks behind hobs and sinks, which take grease and water splashes.
  • Busy floors in kitchens and hallways, where dirt gets ground into the joints.

The trade-off is the application. Epoxy is a two-part product with a short working window, and residue left on the tile faces is hard to shift once it sets. That's why it's often a job for an experienced tiler. If you have one lined up, ask whether they'd use epoxy in your shower or on your worktop.


What the EN 13888 codes on the bag mean (CG1, CG2, W, A, RG)

EN 13888 is the European standard for tile grout, and its codes tell you what a grout is built to do. CG means cementitious grout and RG means reaction resin grout, which is the epoxy type.

Cement grouts come in two classes. CG1 is a normal grout and CG2 is an improved grout. CG2 can carry extra letters: W for reduced water absorption and A for high abrasion resistance. A grout marked CG2 WA has both, which makes it the sensible cement option for showers, kitchens and busy floors. It still won't be as dense as epoxy, so sealing is still worth doing. You may also see F, which means fast-setting.

The code is printed on the bag, and many of our product pages show photos of the front and back of the pack or a downloadable data sheet.


Kitchen island with white square tiles on the worktop and splashback, dark grout joints and a gas hobKitchen island with white square tiles on the worktop and splashback, dark grout joints and a gas hob
Worktops and splashbacks take oil and food spills, which is where epoxy grout earns its place.

Underfloor heating: both work, 8mm has a slight edge

Underfloor heating pushes heat up through everything above it, and every layer adds thermal resistance. Manufacturers commonly set a limit of 0.15 m²K/W for the laminate and underlay combined.

HDF resists heat in proportion to its thickness, so an 8mm board uses up less of that allowance than a 12mm board. That leaves more room for the underlay. 12mm still works on underfloor heating, as long as you pair it with a thin, low-resistance underlay rather than standard foam. Expect it to warm up a little more slowly.

Whichever thickness you choose, confirm the product is approved for underfloor heating and check the underlay's thermal resistance before you buy.


Water resistance: kitchens, utility rooms and bathrooms

Start with the tile manufacturer's recommended joint width, then pick a grout made for it. Every grout states the joint widths it suits on the packaging, and fine-joint and wide-joint grouts aren't interchangeable. A grout used outside its range can crack, shrink or wash out of the joint.


Flexible grout for underfloor heating, timber subfloors and large-format tiles

Standard cement grout is rigid, so it cracks wherever the surface underneath moves. Heated floors expand and contract with every heating cycle, timber subfloors flex under foot traffic, and large-format tiles carry movement across fewer joints. In all three cases, use a flexible grout, ideally with a flexible adhesive, and ask your tiler about movement joints.

Sealer won't fix this. It protects against water and stains, but it can't stop a crack forming. If you're tiling several rooms at once, check each one: a hallway on a concrete screed and a kitchen over underfloor heating may need different grouts.


Open-plan kitchen and living room with large grey porcelain floor tiles and thin grey grout jointsOpen-plan kitchen and living room with large grey porcelain floor tiles and thin grey grout joints
Large-format tiles and heated floors need a flexible grout that can handle movement.

Which grout colour should I choose for my tiles?

Choose a grout close to your tile colour for a calm, seamless finish, or a contrasting one to show off the tile shape and pattern. On floors, mid greys and darker tones are the practical choice.


Matching or contrasting grout

Matching grout lets the tiles read as one surface, which suits large-format tiles, small rooms and stone-effect looks. Contrasting grout outlines each tile, which is why dark grout is popular with white metro tiles and patterned layouts. A contrast also shows up any uneven joints, so it rewards careful tiling.

Coloured grouts, such as greens, browns and blues, can pick out a shade from a patterned or decor tile. Take the colour from the tile itself rather than choosing it on its own from a chart.


The best grout colours for floors

On floors, mid greys, sand greys and other mid to darker tones hide everyday dirt and footprints far better than bright white. White floor grout looks sharp on day one and shows every muddy boot and spilled coffee after that. Sealing helps, but it won't make white floor grout low-maintenance.

Walls are more forgiving. White and pale grouts are easier to live with there because they don't take foot traffic, though shower joints still benefit from sealing or epoxy.


Test the colour on a spare tile before you commit

Grout dries to a different shade than it looks when wet, usually lighter, so judge it once it's dry. Grout a spare tile or an offcut first, and let it dry fully before deciding. Our free tile samples are handy for this if you haven't ordered yet.

When you grout the room, mix full batches with the same amount of water each time. Splitting a bag into small mixes, or varying the water, can give patchy shades across a floor. Order enough grout for the whole job at the start, so you're not mixing a different batch halfway through a room. Our guide on how much tile you actually need can help you work out the room size and quantities.


Spare porcelain tile on a workbench with three dried grout test strips and a grout floatSpare porcelain tile on a workbench with three dried grout test strips and a grout float
Test grout colours on a spare tile and judge them once fully dry.

Do I need to seal grout, and which grout sealer is best?

Seal cement grout in showers, kitchens and on floors, using a penetrating sealer once the grout has fully cured. Epoxy grout generally doesn't need sealing. Cement grout is porous, so unsealed joints soak up water, soap and dirt and discolour faster. Nothing fails if you skip sealing, but the joints mark sooner and are harder to clean.


Which rooms need sealed grout

Seal cement grout in showers and on bathroom walls, where constant water and soap residue stain unprotected joints and encourage mould. Seal it on kitchen splashbacks and floors, which take cooking splashes and spills, and in hallways and utility rooms, where mud, pets and wet shoes do the damage. On a dry feature wall in a living room, sealing is optional. Any area grouted with epoxy usually needs no sealer.

Natural stone tiles, such as marble, limestone and travertine, need sealing before grouting as well as after. The first coat stops grout pigment and moisture staining the stone's surface and edges. Follow the stone supplier's instructions for the sealer and number of coats.

If the grout is already stained, clean it before sealing, because sealer locks in whatever is on the joint. Our guide on how to clean bathroom tiles covers grout cleaning.


Penetrating vs colour-enhancing grout sealers

Penetrating (impregnating) sealers soak into the grout and are usually invisible. They repel water and stains from inside the joint and let the grout breathe. Film-forming and colour sealers sit on the surface instead. Some darken or enhance the grout, and grout colour sealers add an even colour layer that can refresh tired joints, though that layer wears and needs more upkeep.

Check compatibility on the label. Most grout sealers are made for cement grout, so they're the wrong product for epoxy joints.


The best grout sealer for cement grout

For cement grout on floors and in wet areas, a penetrating, invisible sealer is the safest everyday choice. It protects the joint without changing its look, and there's no surface film to scuff or peel. Check three things on the label: that it's suitable for cement grout, suitable for your tile type, and approved for where you'll use it, such as showers or floors.

Coverage depends on the product, the joint width and the tile size, so narrow joints on large tiles use far less sealer than wide joints on small mosaics. Many product pages on our website include a downloadable data sheet with coverage and application details, and some show photos of the front and back of the pack. If you can't find what you need, WhatsApp, call or email us and we'll be happy to help.


How to apply grout sealer

  1. Clean the grout and tile faces, removing dirt, residue and grout haze, then let everything dry fully.
  2. Wait for the grout to cure. Follow your grout manufacturer's cure time, often 48–72 hours for cement grout, and wait longer if in doubt.
  3. Apply sealer along the joints with a small brush or applicator, keeping it off the tile faces where you can.
  4. Wipe any excess off the tile surface with a clean cloth before it dries, within the time on the label.
  5. Add a second coat only if the instructions allow it, typically in showers and other high-risk areas. Extra product without good technique leaves a surface film, not more protection.
  6. Keep the area dry and avoid heavy use for as long as the label says.

Pro Tip: check the grout is ready before you seal

Sealing too early traps moisture in the joint, which weakens protection and can leave a hazy residue. Once the cure time on the bag has passed, look closely at the joints. They should be one even colour, with no darker damp patches, and hard to mark with a fingernail. If some joints still look darker than the rest, give them another day.


Hand applying clear grout sealer along a floor tile joint with a small brush, a white cloth beside itHand applying clear grout sealer along a floor tile joint with a small brush, a white cloth beside it
Brush sealer along the joints and wipe any excess off the tile faces before it dries.

How often to reseal grout

Sealer wears down with cleaning products, foot traffic and repeated wet and dry cycles, so showers and busy floors lose protection faster than a quiet wall. Check by eye and with a few drops of water. It's time to reseal when water stops beading and soaks in quickly, when the grout darkens when wet and takes longer to dry, or when stains take hold more easily than before. Clean the joints, let them dry, then reseal using the same steps.


Common grout mistakes to avoid

Most grout problems come from a handful of avoidable choices:

  • Choosing white grout for a floor. It shows dirt within weeks, while a mid grey stays presentable far longer.
  • Using rigid grout over underfloor heating or a timber subfloor, so the joints crack as the floor moves.
  • Ignoring the joint widths printed on the bag. Outside its range, a grout can shrink, crack or wash out.
  • Mixing small batches or changing the amount of water, which leaves patchy colour across the floor.
  • Judging the colour while the grout is still wet, instead of waiting for a test tile to dry.
  • Leaving epoxy residue on the tile faces. Once it sets, it's very hard to remove.
  • Sealing too early or over dirty grout, which locks moisture or dirt into the joint.
  • Forgetting to seal natural stone before grouting, so grout pigment stains the stone.
  • Running short halfway through a room and finishing with a second batch that doesn't quite match.

Tile grout FAQs

Should I use cement or epoxy grout in a shower?

Either works. Epoxy grout gives the lowest-maintenance result because it's dense, resists water and soap staining, and doesn't need sealing. Cement grout is easier to apply and works well in a shower if you choose a CG2 WA grout and seal it once it has cured.

What colour grout goes with white or grey tiles?

With white tiles, white or pale grey grout gives a clean, seamless look, while charcoal or dark grey outlines each tile. With grey tiles, a grout a shade lighter or darker than the tile blends in best. On floors, lean towards mid greys, which hide dirt better than white.

Can I seal grout on the same day I grout?

No. Cement grout needs to cure first, often 48–72 hours. Follow the cure time on your grout's packaging, and wait longer if the joints still look damp.

Does a grout sealer change the colour of grout?

A penetrating sealer is designed to be invisible, so the grout keeps its natural look. Colour-enhancing sealers and grout colour sealers do change the finish, so check the label for the result you'll get.

Can I use grout sealer on epoxy grout?

You generally don't need to. Epoxy grout is already dense and low in absorption, and most grout sealers are made for cement grout. Check the product's compatibility notes before using one.


Buy tile grout and grout sealer from Tile Merchant

Ordering grout and sealer together means nothing holds the job up once the tiles are down. Browse our range of tile grout, including grouts from Bostik, Botament and Evo-Stik, then add a grout sealer [LINK: grout sealer category] that suits your grout type. Use the EN 13888 code, your tile's recommended joint width and your tiler's advice to confirm what you need, and order free tile samples if you want to test grout colours against your tiles first.

We deliver nationwide across Ireland, or you can visit one of our showrooms to see tiles in person and talk through grout options with our team. If you're also planning a shower, our shower tanking guide covers the waterproofing that goes under the tiles.


White metro tiles shown with white grout on the left and charcoal grout on the rightWhite metro tiles shown with white grout on the left and charcoal grout on the right
The same white metro tiles with matching white grout (left) and contrasting dark grout (right).

Why Choose Tile Merchant?

We offer extremely competitive pricing on our entire range of tiles, paving, wall panelling and likewise. We stock a huge range of wall and floor tiles, and our prices are competitive for retail and trade. Our stock is widely available in our tile stores in Ireland, which are open 7 days a week.

Alternatively, if you’d prefer to shop our tiles online, we can supply you with free samples delivered for free.


Author: Louise Connaughton, Tile Merchant

Article written by Louise Connaughton, Tile Merchant

Home improvement sales specialist

Louise Connaughton is a tile and home improvement sales specialist at Tile Merchant with over 4 years' experience helping homeowners and trade professionals choose the right products for their projects. She specialises in porcelain tiles, natural stone paving and flooring solutions for Irish homes. Outside of work, Louise enjoys interior design, discovering new home improvement trends and spending time with family and friends.

More from Tile Merchant

Explore All
8mm vs 12mm laminate flooring: light oak-effect laminate running through a bright living room and hallway
Blog

17 November 2026

What's the Difference Between 8mm and 12mm Laminate Flooring?

8mm vs 12mm laminate flooring compared: feel, noise, floor height, underfloor heating and wear ratings, so you can pick the right thickness for each room.

Shower wall half tiled and half tanked with waterproof membrane and tape before tiling
Blog

11 November 2026

How to Waterproof a Shower Before Tiling: A Step-by-Step Tanking Guide

Step-by-step guide to tanking a shower before tiling: what to waterproof, which board to use, a full materials list and how much tanking kit you need.

Patio slabs covered in black spots caused by lichen in a shaded Irish garden, showing the problem explained in this diagnosis guide
Blog

3 November 2026

What causes black spots on patio slabs? A full diagnosis guide

Black spots on patio slabs can be lichen, algae, rust or runoff. Learn how to diagnose the cause and remove black spots safely without damaging your stone.

Clayton Oak SPC herringbone flooring in an open-plan kitchen extension with roof lights and black-framed garden doors
Blog

2 November 2026

Why This Family Chose SPC Flooring Over Engineered Herringbone

See why one busy family swapped engineered herringbone for waterproof SPC flooring across their whole ground floor, with tips on prep, layout and fitting.

Artificial grass vs real grass in an Irish back garden, with a patchy natural lawn on one side and artificial grass on the other
Blog

27 October 2026

Artificial Grass vs Real Grass: Irish Costs & Upkeep

Artificial grass vs real grass in Ireland: real installed prices, 10 and 25-year costs, upkeep, dogs, drainage and which lawn suits your garden best.

Small modern bathroom showing large format floor tiles, white wall tiles and a walk-in glass shower, illustrating the best tile size for a small bathroom
Blog

20 October 2026

Best tile size for a small bathroom: floor and wall guide

Find the best tile size for a small bathroom floor and wall. Learn how large format and wood effect tiles can make a compact space feel bigger.

loader
Loading...

You currently have no products in your wishlist

Shop Tiles